推荐主题
查看: 944|回复: 0

使用阳极多孔氧化铝模版通过纳米压印制备再生抗反射蛾-眼表面

[复制链接] qrcode

24

主题

24

帖子

128

积分

超级版主

Rank: 8Rank: 8

积分
128
发表于 2018-4-11 10:54:33 | 显示全部楼层 |阅读模式
Preparation of renewable antireflection moth-eye surfaces by nanoimprinting using anodic porous alumina molds
使用阳极多孔氧化铝模版通过纳米压印制备再生抗反射蛾-眼表面

Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena 36, 031802 (2018);

https://doi.org/10.1116/1.5016369

Takashi Yanagishitaa), Toshiaki Kondo, and Hideki Masuda
Hide Affiliations
Department of Applied Chemistry, Tokyo Metropolitan University, 1-1 Minamiosawa, Hachioji, Tokyo 192-0397, Japan
a)Electronic mail: yanagish@tmu.ac.jp

ABSTRACT
摘要

Renewable antireflection surfaces were formed by the lamination of polymer thin films with moth-eye structured surfaces. Moth-eye structures were prepared by nanoimprinting using an anodic porous alumina mold. Thin-film lamination was performed using a photocurable monomer as an adhesive. A renewed low-reflectance moth-eye structured surface could be exposed by peeling the uppermost film from the sample.

        通过具有蛾-眼结构化表面的聚合物薄膜的层压形成可再生的抗反射表面。使用阳极多孔氧化铝模版通过纳米压印制备蛾-眼结构。使用光固化单体作为粘合剂进行薄膜层压。通过从样品上剥离最上面的膜可以暴露出更新的低反射率蛾-眼结构化表面。

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?立即注册

x
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

快速回复 返回顶部 返回列表